濟南推拉蓬不僅外形美觀，而且性價比高，逐漸受到人們的喜愛。那么這類推拉蓬如何施工才更穩定呢？下面小編為您解說幾點。

Jinan sliding awning is not only beautiful in appearance, but also cost-effective, and gradually loved by people. So how can the construction of such push-pull awning be more stable? Here are some explanations for you.

1.檢查鋼絲繩。立鋼絲繩的安裝是一件非常重要的事情。我們需要仔細檢查鋼絲繩或保護套上是否有磨損信息。一旦有磨損，需要立即更換，以防發生事故。

1. Check the wire rope. The installation of vertical steel wire rope is a very important thing. We need to carefully check the wire rope or protective sleeve for wear information. Once there is wear, it needs to be replaced immediately to prevent accidents.

2.制定標準化濟南推拉蓬。濟南推拉蓬的強度和韌性關系到整個看臺的穩定性。如果不合格，倒塌事故發生的概率將大大增加。我們需要嚴格按照標準仔細檢查其切割精度、鉆孔直徑、連接結構等。

2. Formulate standardized Jinan Tulapong. The strength and toughness of Jinan sliding awning are related to the stability of the entire stand. If it is unqualified, the probability of collapse accident will be greatly increased. We need to carefully check the cutting accuracy, drilling diameter, connection structure, etc. in strict accordance with the standards.

3.檢查推拉蓬裝置的安裝情況。作為推拉蓬支架的基礎設施，各單元需要我們仔細檢查膜單元的邊界與附著結構是否連接正確。制造過程中的材料和粘貼痕跡要清晰，各種施工區域和精度要達到相關標準，這樣膜單元才能更好的連接，從而使整體結構更加完善.

3. Check the installation of the sliding roof device. As the infrastructure of the sliding roof support, each unit requires us to carefully check whether the boundary of the membrane unit is correctly connected to the attachment structure. The material and pasting traces in the manufacturing process should be clear, and the various construction areas and precision should meet the relevant standards, so that the membrane units can be better connected and the overall structure can be more perfect

此外濟南推拉蓬的鋼材如果長期暴露在天氣等自然力量的作用下，必然會生銹老化，自身的承載能力會下降，建筑的美觀也會受到影響。

In addition, if the steel of Jinan Sliding Canopy is exposed to natural forces such as weather for a long time, it will rust and age, its bearing capacity will decline, and the beauty of the building will also be affected.

因此，防腐也是推拉蓬廠家設計中需要解決的常見問題。目前濟南推拉蓬廠家的做法主要是采用新型防腐蝕和結構材料。在實際的建筑設計中廠家對所設計的建筑提出了特殊的要求，如涂裝防銹涂料、防火涂料等。

Therefore, anti-corrosion is also a common problem that needs to be solved in the design of the push-pull awning manufacturers. At present, the practice of Jinan sliding awning manufacturers is mainly to use new anti-corrosion and structural materials. In the actual architectural design, the manufacturers put forward special requirements for the designed buildings, such as anti rust coating, fire retardant coating, etc.

防火涂料的一般做法是先刷兩層紅鉛防銹底漆，再刷鋼結構面漆兩層(面漆顏色由甲方確定)。此外，鋼結構建筑的鋼結構構件施工也有一定的要求，如構件出廠前刷一層紅鉛防銹底漆;鋼結構安裝調整完畢后，應將其清洗干凈，再刷底漆一遍、面漆兩遍。

The general practice of fire retardant coating is to brush two layers of red lead antirust primer first, and then two layers of steel structure finishing coat (the color of finishing coat shall be determined by Party A). In addition, the construction of steel structure components of steel structure buildings also has certain requirements, such as brushing a layer of red lead anti rust primer before the components leave the factory; After the installation and adjustment of the steel structure, it shall be cleaned, and then painted with one coat of primer and two coats of finish.

事實上，推拉蓬的長期使用是建立在良好的保護和管理的基礎上的，忽視保護管理容易造成重大事件，這一點要多加注意，您可以來我們網站http://m.jyxingyu.com進行咨詢！

In fact, the long-term use of Tulipong is based on good protection and management. Ignoring protection and management is likely to cause major events. Pay more attention to this. You can visit our website http://m.jyxingyu.com Consult!